The Minelab Explorer IIMetal Detector is the number one coin, relic, and beach hunting detector out there. You will be amazed at the depth of this metal detector.

  We promise Fast, Honest, and Courteous Service.

 800-662-0810ask for Ron  Accurate Metal Detectors 

We offer great expert tech support on the Minelab Explorer 2.

         The Explorer II Metal Detector is now available as a Pro Pack.        

 Do not pay Retail    $1395.00

  Call on Your Special Promotion

 minelab explorer II, minelab.com,www.minelab.com,explorerii,minelab explorer 2,explorer II,explorer 2,explorer minelab,explorer xs, minelab,mine lab,,explorer, minelab,minelab explorer,explorer xs,metal detection,metal detector,metal detectors,treasure hunting,jewelry, relic, old coins,explorerii, explorer ii,beach metal detector, beach 

Digital Technology - Simple - Powerful -Fast

From the world leader in metal sensing technology, the NEW Explorer II raises the standard for metal detecting. This switch-on-and-go detector finds valuable coins, rings, jewelry and relic targets that others walk right over.

Packed with exclusive features including SMARTFIND™ 2 dimensional discrimination, multiple frequencies operating together in Minelab's exclusive Full Band Spectrum (1.5 to 100 kHz) technology and now with fast operating 2nd generation software. Explorer II is the world's best performing metal detector.

The Metal Detector that revolutionized treasure hunting forever! 

The Legendary Explorer II is recognized around the world as the deepest, most powerful Coin, Jewelry Relic and Treasure Detector on the market today! 

explorer accessories for this product | explorer manual product manual
1.5 kHz to 100 kHz!

Incredible Depth- 
The frequency range of 1.5 kHz to 100 kHz is the REAL horsepower behind the Explorer ll's world famous target depth... here's WHY: 

The lower the frequency, 1.5 kHz for example, the deeper the signal travels. And, the higher the frequency, 100 kHz for example, the more sensitive the signal is to smaller objects closer to the surface.

Simple Physics right??- Read on... 

Treasure Targets in the ground respond differently to different frequencies--making signals stronger or weaker depending on HOW much a frequency "excites" the target. If you only have a limited frequency range like other brands, you're limiting yourself to what you may find. You could be walking over VALUABLE targets you don't even know are there!

(Can you trust the frequency range of your current detector?) 

The Explorer II combines the best of both worlds- Frequency RANGE and DEPTH! When you're hunting with an Explorer II, you can be sure you have the most powerful treasure hunting detector in the world. You'll have the technological edge other brands only dream of.

POWERFULLY ACCURATE- 
Multiple frequencies operating simultaneously sends and receives much more information to the Explorer II than a standard 1 or 2 frequency VLF detector. This information is then processed by the Explorer II's NEW 2nd Generation software to provide the world's most accurate discrimination . That means you don't have to waste time digging trash! The Explorer ll's microprocessor eliminates the bad effects on depth "ground conditions" may cause. 

SIMPLE yet incredibly VERSATILE- Beginners will appreciate the Explorer II's "turn on and go" simplicity. Just turn it on, set your threshold, press noise cancel, and you’re ready to hunt in settings optimized for virtually any condition. Advanced users will love the power to customize countless programs to suit YOUR treasure hunting needs.

Technology: Patented FBS (Full Band Spectrum)

heminelab explorer II, minelab.com,www.minelab.com,explorerii,minelab explorer 2,explorer II,explorer 2,explorer minelab,explorer xs, minelab,mine lab,,explorer, minelab,minelab explorer,explorer xs,metal detection,metal detector,metal detectors,treasure hunting,jewelry, relic, old coins,explorerii, explorer ii,beach metal det

ector, beach Accurate Metal Detectors 

14320 Indigo   Corpus Christi Texas 78418

    Credit Cards and PayPal Excepted

Hello I would like to introduce myself. My name is Ron Coen and I honest when I say the Minelab Explorer II is one of the most Exciting machines I have ever used. The ExplorerII metal detector has changed the way metal detecting is done and its seems now that we have all been in the Dark Ages. The Minelab Explorer has major advances in not only ground stability but a the largest amount of discrimination in the market. The explorer 2 can be found at www minelab com.

Though People have stated this is a complex machine to operate I disagree I have tough many beginners in minutes how to use the Explorer II. I have over 1000 hours on the machine and I have many tricks to simplify this machine. This machine puts the power of metal detecting back in your own hands. Thanks Minelab for a Great Machine. I have found more jewelry in the last year with this machine than I had found over the last 5 years hunting. As a avid hunter for the last 30 years I think this is the most amazing machine ever invented. I started as a teen and still a bit in shock on how far Minelab has taking the fun of finding treasures.

          1. The Minelab Explorer II has amazing depth.

2. The Minelab Explorer II has great ground stability.

          3. The Minelab Explorer II has 1024 separate discrimination points where most machine had 5 to 10.

          4. The Minelab Explorer II has Iron Mask Mode for hunting relics.

          5. The Minelab Explorer II has the capabilities to put in or take out individual targets by the exact ferrus and Conductive target range.

          6. The Minelab Explorer II can easily knock out unwanted targets such as nails and those pesky soda and beer crown caps.

          7. The Minelab Explorer II has the capability to save 6 preset and adjustable programs. 

           8. The Minelab Explorer II has a factory set so you can start hunting and finding items in minutes.

Explorer ll has been to the design studio. It is now an attractive combination of black and beige in appearance. The new Explorer ll graphics on the handle are very bold and the whole machine looks ready for action. It feels great due to the seamless fit of the new black coil and new carbon fiber lower shaft.

The Minelab Explorer II coil cable access panel is gone - instead this area is exposed and the coil cable is fed up through the newly designed round carbon fiber shaft. This is a major change and in a way is rather nostalgic by bringing back a traditional round lower shaft design but instead built with 21st-century materials. Other good news is the coil cable is still hidden and unlikely to catch on foliage.

A new front panel with Explorer ll graphics has been introduced with new darker colors, and the tactile push buttons now feel much better with just very gentle touches operating the many functions. All function buttons are the same as on the older XS model with just one slight position change to the 'Power ON/OFF' button, so the Explorer ll should be immediately familiar to seasoned XS users.

The screen's visibility has improved by use of an easier to see through material. Finally the new arm-rest material, also colored black, is of a stronger, more flexible material than the older, Explorer XS model. Overall, it is a seriously good-looking detector!

There are a number of operational differences to be found in Explorer ll compared to that of the XS. This is due to the faster and more efficient 2nd Generation Explorer Software. These differences include:

* Two co-ordinates in the Digital Screen: Now the user can discriminate targets in the digital screen, using two sets of numbers: Ferrous Content & Conductivity.
* Increased resolution when displaying target's properties (Ferrous Content & Conductivity): In the digital display mode both the ferrous content and the conductivity are displayed in a 0 - 31 range, which can give up to 1024 resolution points - old XS displayed only 32 possible target combinations. What this means is in Fer display the higher the readout the more likely it is to be rusted iron. Similarly, if a low Fer readout is displayed then the target is likely to have few ferrous characteristics. Be advised that holed or "ringed" rusted items may produce erroneous readings. In Cond, the higher the readout the more conductive the target will be, a lower readout means a low conductive target. Typical modern coin finds might display for example Fer 7 Cond 24. A junk target might for example display Fer 28 Cond 21 and so on. It means 50% more useable information for the user and it is also possible to work in Digital Mode all the time if one wants without ever having to look at the cursor location. The 2-Number Display System coupled with the 28 Tone ID can give the user all the valuable information needed about any target.
* Cursor lock: Previously on the XS the cursor would move to the Ferrous area of the screen if a discriminated junk target was passed over. Now, this will not occur some of the time. If the target is deemed to be junk, but too small to justify a cursor movement, the cursor will stay locked-on to the previous target's screen location even though the operator can distinctly hear the tell-tale threshold dip of a ferrous target and/or a non-repeatable iffy one-way signal.



* Increased resolution for Threshold setting: The Threshold setting range has now been increased from 0 - 20 to 0 - 40. The factory preset value is now set at 20. The Threshold is now finer sounding. What this means is, there is a more flexible manual control over the threshold volume level previously available on the XS. A point was reached on the XS when at a setting of 5 the detector became silent. This has been improved and now through the new Koss headphones, a low and very comfortable setting can be heard at 8, and can be set progressively lower while still being able to hear a very soft tone. The danger of operating too quietly and perhaps missing small finds has now been eliminated.
* Enhanced depth indicator: Depth indicator response is now much faster. It can help to scrub the ground with the coil to determine target depth more accurately. Small 5 cent sized coins are now indicated more distinctly.


Explorer II Features:

* 2nd generation Explorer software
* Dual co-ordinate Ferrous and Conductive display
* Exceptional depth
* Large easy to read display screens
* Target profiling with 2-D Smartfind
* Tone identification of targets
* Target depth indicator
* Signal blanking on discriminated targets
* High powered microprocessor
* Overload signal on large targets

* Simple push button menu control
* Easy to use 'Quickstart' program
* Full function 'Advanced' program
* Lightweight, ergonomic design
* Easy access drop in battery case
* Backlight and display contrast control
* 10-inch submersible search coil
* Much more!
 SO why not buy one today!!!!